Wenzhou jhenten machinery co.,ltd
Wenzhou jhenten machinery co.,ltd Quality Create Future
Add to Cart
500L 1000L 1500L 304 316L stainless steel mixing tank three 3 layer with electric heat
Conical Bottom Tank Specifications
Conical Bottom Tank is used for mixing all kinds of liquid products in pharmaceutical, food, chemial and biological
fields.We have different kinds of agitators:
1-Bottom magnetic agitator with propeller impeller, speed from 50-400rpm or 50-800rpm. this
kind of agitator is mixing thin viscosity , such as eyedrop, injection, CIP liquid, water, etc...
2-Top mechancial agitator with propeller impeller, speed at fix 71rpm or adjustable 20-200rpm
or special requirement. this kind of agitator is mixing syrup, injection, blood, oral liquid, culture media,
etc....
3-Tank bottom emulsifier, speed max 2900rpm for small vessel, 1480rpm for bigger tank. this
kind of agitator is mixing most high viscosity , such as suspension, oil, lotions ,fat emulsification , etc....
Conical Bottom Tank Main technologies
1.Mixing oil and water phases materials in high speed to get perfect emulsion product of good quality.
2.Machine consists of vacuum-resistant vessel with jacket for heating and cooling. Equipped with high speed homogenizer, scraping agitator, vacuum pump, and hydraulic pump for lifting, heating & cooling system.
3.With vacuum pump to take the air bubbles out of mixed product, and extend the time of storage.
4.Scraping unit is with moveable teflon scrapers to scrape off the materials on the tank wall and the anchor to move the materials to the center area to get better blending and mixing. The teflon scrapers are maintained manually and easily without any tool.
5.Our vacuum emulsifying equipment equipped with heating & cooling system which simplifies the processing. Within this same equipment, you can do from heating-melting-emulsifying-air bubble reduction(by vacuum)-cooling without changing vessels, it saves lot of labor and time for your production.
6.All contacted parts of equipments are SUS316L,the product homogenized in vacuum and close vessel can be sanitary and high quality.
7.The measuring of raw materials, the recording of temperature for heating, melting, emulsifying, cooling, and the change of mixing speed, and the vacuum suction can be controlled.
Conical Bottom Tank paremeter
| Working Volume(L) | Dimension (DxH) mm | Total Height (mm) | Diameter of Inlet & Outlet (mm) | PU Insulation (mm) | Motor Power | Mixing Speed |
| 500 | 900 x 800 | 2200 | Φ38 | 50 | 0.75 | ABB/ Siemens |
| 800 | 1000 x1000 | 2400 | Φ38 | 50 | 0.75 | |
| 1000 | 1100 x 1200 | 2900 | Φ38 | 50 | 1.1 | |
| 2000 | 1300 x 1500 | 3100 | Φ38 | 50 | 1.5 | |
| 3000 | 1550x 1500 | 3300 | Φ51 | 50 | 1.5 | |
| 4000 | 1600 x 2000 | 3800 | Φ51 | 50 | 2.2 | |
| 5000 | 1700 x 2200 | 4150 | Φ51 | 50 | 2.2 | |
| 6000 | 1700 x 2600 | 4500 | Φ51 | 50 | 3 | |
| 1. It can be made according to special requirements of customers. Total Height is in accordance with outlet height of 300mm. If outlet height is changed, Then the total height shall also be changed! | ||||||
| 2. The Power of Motor shall be changed according to the Viscosity of material In the tank! | ||||||
Advantage for Conical Bottom Tank
1. Completely Meet GMP
2. Using Japan NSK bearings
3. Material contact part all use SUS316L
4. Safety protecting functions, make the produce saver
5. Homogenizer's design mainly stem from Japanese technology.
6. Siemens Inverter, power-saving, machine-protect, keeping the machine working stably
Stirring scrap and middle stirring rotating the opposite direction make the mixing more equally
7. Burgmamn mechanical seal, seal good, long working life, keep the homogenizer work 24 hours continually.
8. Slow stirring axle adopts 2 sets of mechanical seal and 2 sets frame oil seal, make the seal saver.
9. Install a fall buffer unit on the hydro-cylinder in the hydraulic system; keep the cover up and down stable
Transport & packaging