
Add to Cart
Stainless Steel 304/316L customlized Security Filter Housing With ASME U Stamp
Feature
• The material liquid contact surface Ra reaching 0.6μm closes to the sanitary grade requirement
• The filter housing has top and bottom drain valve which drain liquid conveniently and quickly
• Cartridge sealing surface uses spring type sealing. It's easy to Operate.
Detail Description
Security Filter has a clamp closure. All cartridge filter are designed with universal cuos, allowing catridges 222 or flat end. This type filter construction is suitable for low pressure situation and prefilter with lowest cost.
Application
Water Finish: R.O reverse osmosis filtration for drinking water
•Food and beverage industry: wine, mineral water, drinking water filtration
Operating Conditions |
| |
Max operating pressure | 0.6MPa,1.0MPa | |
Max operating temperture | 150℃ | |
Material |
|
|
Shell | 304,316L | |
Vent/ Drain valve | 304,316L | |
Eyebolt | 304 | |
O-ring | EPDM, PTFE, Viton, Silicone | |
connection |
|
|
Shell connection | Tri-clamp,Flange ( Eyebolt) | |
N1, N2 In-outlet | Flange, Tri-clamp, Thread | |
N3Pressure gauge (option) | 1.5” Tri-clamp | |
N5 Drain valve(option) | 1” Tri-clamp, Thread | |
Cartridges connection | DOE type,222 type | |
Surface Finish |
| |
Finish type | Mechanical/ Electrolytical polishing;Sand blasting | |
Polishing precision | Inner surface 0.6μm, Outside surface 0.8μm |
Selection Table |
|
|
|
|
| ||||||
| [Qty. of cartridge] | [Model of cartridge] | [Cartridges connection] | [Shell material] | [In-outlet Connection] | [O-ring] | |||||
JTGRP | 7R | 20 | T | 4 | L | E | |||||
| 5R=5pcs | 10=10” cartridge | T=222 type | 4= 304 | F= flange | E=EPDM | |||||
| 7R=7pcs | 20=20” cartridge | D=DOE type | 6= 316L | K=Tri-clamp | P=PTFE | |||||
| 9R=9pcs | 30=30” cartridge |
|
| L= thread | V=Viton | |||||
| 15R=15pcs | 40=40” cartridge |
|
|
| S=Silicone |