Wenzhou jhenten machinery co.,ltd
Wenzhou jhenten machinery co.,ltd Quality Create Future
Add to Cart
| ZTCD Side Entry Bag Filter Housing, with a bag filter bag, for some coarse filtration and pre filtering process |
| Side entry has effectively save the filter space, the entire structure of the economic and reasonable |
| By the pressure ring, a spring ring bag mouth, ensure good seal between the filter and the filter bag |
| Stabilizer blade, the installation size can be adjusted according to the requirements of the scene |
| Surface Finish | |||
| Finish Type | Mechanical polishing, Electrolyticl polishing, Sand blasting, pickling | ||
| Polishing precision | Inside wall0.6μm, Outside wall 0.8μm | ||
| Basket0.6μm | |||
| Operating Conditions | |
| Max Operating pressure | 1.0MPa |
| Max Operating Temp. | 110℃ |
| Material | |
| Shell | 304, 316L, SAF2507, Carbon |
| Eyebolt | 304 |
| Stabilizer blade | 304 |
| O-ring, | EPDM, PTFE, Viton, Silicone |
| Dimension Parameters | Cover | |||
| 1# | 2# | 3# | 4# | |
| Total height | 990 | 1365 | 525 | 635 |
| The distance from inlet to center | 147 | 92 | ||
| Diameter | Φ204 | Φ204 | Φ114 | Φ114 |
| The height from inlet to ground | 835 | 1205 | 445 | 555 |
| The height from outlet to ground | 250 | 300 | 100 | |
| In-outlet size | 1.5” or 2” | 1” or 1.5” | ||
| Stabilizer blade | 500 | 800 | 300 | 400 |
| Max flow, m3/h | 20 | 40 | 6 | 12 |
| The above-mentioned data is the standard, it can customize according to customer's requirements. | ||||
| Connection | |
| Connection of shell | Flange |
| In-Outlet | Flange, Quick-open, Screw thread |
| Pressure |
1.5”(1# Bag /2# Bag) M14×1.5 Internal Screw thread (3# Bag /4# Bag) |
| Vent Valve | 1/4” External Screw thread |
| Selection Table | ||||||||||
| ［Qty. of Bag Filter］ | ［Model of Bag Filter］ | ［Shell Material］ | ［In-outlet connection］ | ［O-ring］ | ||||||
| ZTCD | 1P | 2S | 4 | F | E | |||||
| 1P=1pc | 1S=1# Bag:Φ180 x 430 | 4= 304 | F= Flange | E=EPDM | ||||||
| 2S=2# Bag:Φ180x 810 | 6= 316L | K= Quick-open | P=PTFE | |||||||
| 3S=3# Bag:Φ105 x 230 | L=Screw thread | V=Viton | ||||||||
| 4S=4 Bag #:Φ105x 380 | S=Silicone | |||||||||